SAFETY PRECAUTION CAUTION: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to "dangerous voltage" and to prevent from a risk of electric shock. Warning: To reduce the risk of electric shock, don't open the cabinet. Refer servicing to qualified personnel only. The exclamation point within an equilateral triangle is intended to alert the user to important operating and maintenance (servicing).
Attachments: Never add any attachments and/or equipment without the manufacturer consent; as such additions may result in the risk of fire, electric shock, or other personal injury. Locating: Slots and openings in the cabinet are provided for ventilation to protect it from overheating. Do not block these openings or allow them to be blocked by placing the STB on a bed, sofa, or other similar surface, nor should it be placed over a radiator or heat register.
Contents CONTENTS 1. Remote Control & Panel Description..................................................... 3 1.1 Front Panel Description ...................................................................................3 1.2 Rear Panel Description ....................................................................................4 1.3 Remote Control Description .............................................................................5 2. Hotkey......................................................
Contents 4.5 Delete All Channels .......................................................................................17 5. Installation ............................................................................................ 18 5.1 5.2 5.3 5.4 5.5 5.6 5.7 Single Search................................................................................................18 Multi Search ..................................................................................................20 TP Scan .............
Remote Control & Panel Description 1. Remote Control & Panel Description 1.1 Front Panel Description 1 POWER Is used to switch between the working mode and the standby mode. 2 CH+/- To change channels or for navigating and changing values in menus. 3 Display (4-Digit / 7-Segment) Displays the received channel number while operating and time while in standby mode 4 Remote Sensor Detects the infrared signals from the remote control unit.
Remote Control & Panel Description 1.2 Rear Panel Description 1 S/PDIF Coaxial output for digital audio (AC3). 2 VIDEO CVBS video output for TV AV in. 3 AUDIO HiFi outputs for stereo sets 4 IF IN Satellite input 5 IF OUT Satellite output for cascading to other devices 6 RS232 Serial Port allowing software upgrades 7 TV SCART Output SCART for the connection to a TV set. 8 TO TV Modulator output for the connection to a TV set.
Remote Control & Panel Description 1.
Basic Operations 2. Hotkey 2.1 Power 1. Press [Power] button to switch from TV mode to Standby mode 2. In Standby mode press [Power] button again to switch back to TV mode. The last active channel will be showed. 3. To switch off the STB complete press the main power button. 2.2 TXT 1. Press [TXT] button in TV mode to open the teletext page. This service is depending on the support of the channel provider. 2.
Basic Operations 2. 3. 4. Press [▲/▼/◄/►] keys can moving highlight among each preview program, and only the highlighted preview program can play normally. When the highlight moves to the preview program that you want to play, you can press [OK] key to enter the full screen play. Press [Exit] key to go back to full screen. 2.6 CH+/CHIn TV mode press [Channel Up/Channel Down] to change channel. 2.7 Vol+/VolIn TV mode, press [Volume Up/Volume Down] to adjust volume. 2.
Basic Operations 2.13 App Have no function. 2.14 Audio 1. In TV mode, press the [Audio] button to open the Audio Mode window. 2. Select the item you want to adjust with [▲/▼] and change the value with [Volume Up/Down]. 3. Press [Exit] key to exit. 2.15 Information In TV mode, press [INFO] button can open information screen, in the window shows the parameters of current channel. 2.16 EPG 1. The STB has an Electronic Program Guide (EPG) to help you navigate channels through all the possible viewing options.
Basic Operations 4. Press EPG key will display the current channel detail information. The window is like right: 5. Press OK in schedule and detail window can open the timer window directly. This operation can add the highlighted program to a timer quickly. 2.17 Sub Press [Sub] key set up subtitle on/off. 2.18 Zoom 1. The [Zoom] key allows you to magnify a certain area on the images and the current screen will show 2. Press [Zoom] key again, the image will enlarge rotate as x1, x2, x4, x6, x8, x12, x16.
Basic Operations 2.19 List 1. In TV mode, press the [List] button to stop the display. The sound of the channel will continue. 2. Press [Pause] again to continue the display at the actual moment. 2.20 Pup/Pdw In full screen, press [Page Up / Page Down] key can switch group directly. 2.21 Fav 1. In TV mode press the [Favorite] button to display the Favorite Group window on the screen as the picture beside shows. 2.
Menu Operations 3. Welcome Page 1. When first time power on, it will show welcome page like below. This Welcome page is only for easy operation when first use, user also can setting them in main menu/Tools/Welcome Page. 2. Press [▲/▼] key to move highlight. 3. Press [◄/►] key to modify setup. 4. After set up the parameter, move the highlight to “Auto Scan” and press [OK] key to begin to scan. Move highlight to “Main Menu” and press [OK] key to enter to main menu.
Menu Operations 4. Channel Press [Menu] in the TV mode to enter the main menu. 1. Press [▼/▲] to select the menu item among Channel, lnstallation, Setup and Tools. 2. Press [OK] to enter the selected item. In the Channel menu: 1. Press [▼/▲] to select the wanted menu item among TV Channel List, Radio Channel List, Delete All Favorites and Delete All channels Channel. 2. Press [OK] to enter the selected item. 4.
Menu Operations 4.1.1 Favorite 1. Press number key [1] can open the “Favorite” window like right. 2. You can move highlight between 8 favorite groups by press [▲/▼] key and press [OK] key to make a favorite mark in the right side of the selected favorite group. 3. Press [OK] key again on the marked favorite group can cancel the exist favorite mark. 4.
Menu Operations 2. 3. After input each character, the program list on the left will search the channel according your input, and list the matched channel. Press [Exit] key can close “Find” window and you can select channel from the channels list directly. 4.1.4 Sort 1. Press number key [4] can open the “Sort” window like right. There are five kinds of sorting ways. You can press [▲/▼] key to move highlight and press [OK] key to confirm you selection 2.
Menu Operations 4.1.5.1 Delete In “Edit Channel” menu, press number key [1] can make a delete mark in the right side of the highlighted channel. After save and exit “Edit Channel” menu, the marked channel will be deleted. 4.1.5.2 Skip In “Edit Channel” menu, press number key [2] can make a “skip mark” in the right side of the highlighted channel. After save and exit “Edit Channel” menu, the channel will be skip while user change channel in the full screen. 4.1.5.
Menu Operations 4.1.5.5 Delete all 1. In “Edit Channel” menu, press number key [5] can mark all the channel with delete mark 2. Press number key [5] again can cancel all the delete mark. 4.2 Radio Channel List Basically, the operation of “Radio Channel List” is same as “TV Channel List”, but there is one point different: In “Radio Channel List” mode, there is no video information, so it will always display Radio’s logo in the right side preview window. 4.
Menu Operations 4.4 Delete All Favorites In “Delete All” item: 1. There will display an dialogue for user to key in password. The default Password is “0000”. 2. When you input the correct password, there will show up a warning message box to inquire you whether delete all or not. 3. If you select “Yes”, all favorite channels will be deleted. 4. In step 1 and step 2, press [Exit] key can exit the function directly without save. 4.5 Delete All Channels In “Delete All” item: 1.
Menu Operations 5. Installation After selecting the installation menu you can see the window like beside. In “Installation” menu; 1. Press [CH▲/▼] to select menu items among Single Search, Multi Search, TP Scan, Satellite List, TP List ， Satellite Guide and Unicable Configuration. 2. Press [OK] to enter the selected item. 5.1 Single Search After selecting “Single Search” you will see a window like beside: 1.
Menu Operations ! Notice: After choosing LNB type “Universal” you cannot modify 22K. 3. 4. 5. 6. 7. 8. DiSEqC1.0: Use [Vol◄/►] to switch the options or press [OK] to open the DiSEqC1.0 option list to select directly with [CH▲/▼], press [OK] to confirm it. DiSEqC1.1: Use [Vol◄/►] to switch DiSEqC1.1 option or press [OK] to enter DiSEqC1.1 option to select directly with [CH▲/▼], press [OK] to confirm it.
Menu Operations 5.2 Multi Search When you enter the “Multi Search” menu a window like the one beside will open. 1. In the “Satellite” item press [Vol◄/►] to select the satellite which you want to scan or press [OK] to open the “satellite list” to select directly with [CH▲/▼], and press [OK] to mark/unmark and [MENU] to finish the selection. You can select several satellites in this menu. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and USALS functions to search the marked satellites and scan channels. 2.
Menu Operations 2. TP Index: Use [Vol◄/►] to select the desired transponder or press [OK] to open the TP list to select directly with [CH▲/▼], press [OK] again to display the TP number where the channel can be found. Press [Red / Green / Yellow] key on the RCU for the related functions. ♦ When you press [Red] it will display “New TP” in “TP Index” item. You have to set the parameters of “TP Frequency”, “Symbol Rate” for this new transponder. Therefore use the number buttons of the RCU.
Menu Operations 5. 22K: Use [Vol◄/►] to switch “ON” and “Off”. The 22KHz signal is used in KU universal LNBs to change between low band and high band. ! Notice: After choosing LNB type “Universal” you cannot modify 22K. DiSEqC1.0: Use [Vol◄/►] to switch the options or press [OK] to open the DiSEqC1.0 option list to select directly with [CH▲/▼], press [OK] to confirm it. DiSEqC1.1: Use [Vol◄/►] to switch DiSEqC1.1 option or press [OK] to enter DiSEqC1.
Menu Operations 1. Press [Red] button to enter edit satellite menu. You can edit the satellite’s name and its longitude. 2. Press [Green] button to open the “Add satellite” window. 3. After pressing [Yellow] button you will be asked “Are you sure to delete?”. Select “OK” to delete the marked satellite. Select “Cancel” to cancel the operation. 5.5 TP List When you open the “TP List” menu you will see a window like the one beside. 1. Press [Vol◄/►] to change the marked satellite.
Menu Operations 2. Press [Red] button to open the “Edit TP” menu. Here you can edit the transponder’s data. 3. Press [Green] button to open the “Add TP” menu. Here you can add a new TP and setup its parameters. 4. Press [Yellow] button will open a dialog box asking you to confirm the deletion of the current TP. If you select “OK” all the related channels will be deleted. If you select “Cancel” the operation will be cancelled. 5.
Menu Operations 5.6 Satellite Guide When you enter “Satellite Guide” menu, you will see the screen like beside: Here you can enter your local longitude and latitude and the satellite’s longitude. The receiver calculates the antenna’s orientation and elevation to point your antenna to the selected satellite. 1. Use the [Number] buttons to input the values of “Local Longitude”, “Local Latitude” and “Satellite Longitude”. 2.
Menu Operations 6. Setup When you enter to “System Setup” menu, you will see the screen like right: In “System Setup” menu: 1. Press [▼/▲] key to select menu pages among OSD Language, TV System, Start up Service, Region and Time, Timer Setting, OSD Setting, Parental Lock and RCU Position. 2. Press [▼/▲] key to select menu items among each items. 3. Press [OK] key to enter the selected item. 6.1 OSD Language When you enter to “OSD Language” menu, you will see the screen like below: 1.
Menu Operations 3. 4. Second Audio: If the channel has no correspond audio with “First Audio” but have corresponded audio with “Second Audio”, system will play the second audio language as default. If no audio language corresponds with the “Second Audio”, then the default language of current channel will be played automatically. The selections of audio languages include: English, French, German, Hellenic, Hungarian, Italian, Polish, Spanish, Turkish and Dutch.
Menu Operations 6.3 Region and Time When you enter to “Region and Time” menu, you will see window like right: 1. Region is used for selecting the country which you are in. You can press [◄/►] key to select each mode circularly. 2. GMT Usage: This item is use for open the usage of GMT. You can press [◄/►] keys to switch “Off / User Define / By Region”. 3. The “GMT Offset” item is valid only when the setting of “GMT Usage” is “Uesr Define”.
Menu Operations a) b) c) d) e) f) Current time information will display on the first column; if the current time is incorrect, please modify the time information in “Time” item. Timer Number: You can press [◄/►] keys to set Timer number, and there are 8 timers in total. Timer Mode: There are several modes for Timer to setting, include Off, Once, Daily, Weekly, Monthly and Yearly.
Menu Operations g) 2. is in standby mode or in playing mode, the system will automatically pop a reminding message. Ø The message will always display on the screen, you can press [Exit] key to close it. Press [Exit] key to draw back from “Program Timer” menu. Sleep Timer When you enter “Sleep Timer”, you will see the window like right: Ø Press [◄/►] key to switch the Sleep Time parameter.
Menu Operations 6.5 OSD Setting When you enter to “OSD Setting” menu, you will see a screen like right: 1. Subtitle Display: You can press [◄/►] key to select “On” or “Off”. If the current channel has subtitle information, it will be showed up while this function is “On”. If this function is “Off”, there won’t show up subtitle information even if the current channel has subtitle information. 2.
Menu Operations 1. 2. 3. 4. 5. In “Parental Lock” function, press [OK] key, there will pop an dialogue for you to input the password. The default password is “0000”. When you input the correct password, you will see a screen like right: Menu Lock determining that when user wish to enter “Installation” menu, whether have to input password or not. If the setting of “Menu Lock” is “Yes” which means user have to key in password, set “No” means unlock.
Technical specification 7. Tools When you enter to “Tools” menu, you will see a screen like right: In “Tools” menu: 1. Press [▼/▲] key to select menu pages among Information, Game, Load Factory Default, Software Upgrade and Welcome Page. 2. Press [▼/▲] key to select menu items among each items. 3. Press [OK] key to enter the selected item. 7.1 Information 1. When you enter to “Information” menu, you will see a screen like left. The screen displays information of software version. 2.
Technical specification 2. 3. Ø [▼] — Faster drop Ø [OK] — Pause/Play the game Ø [Exit] — Quit game and draw back to “Tetris” menu. Snake ² Moving highlight to “Setup” and press [◄/►] key to select the game level (speed). ² Moving highlight to “Start” and press [OK] key to start the game. ² Moving highlight to [Cancel] keys and press [OK] key to draw back from the game. ² Start on the game: Ø [▲/▼/◄/►] — use these arrow keys to guide the snake.
Technical specification 4. In step 1 and step 2, press [Exit] key can draw back from this item and without saving. 7.4 Software Upgrade 1. We offer the functions for user to connecting receiver (Master) to the other receiver (Slave) via serial interface to upgrade software code and program list. 2. Connect master receiver to slave receiver via serial interface. Enter “Software Upgrade” menu in master receiver and press [◄/►] keys to switch upgrade mode. 3.
Technical specification 8.
Technical specification LNB CONTROL Power supply Polarized control DiSEqC control 13/18V (500mA max) with short circuit protection 13/18V polarization (vertical/horizontal) DiSEqC1.0, DiSEqC1.1 and DiSEqC1.2 RF MODULATOR Input Output Band TV Standard Output Channel IEC 169-24 Male x 1 IEC 169-24 Female x 1 UHF PAL BG/I/DK, NTSC M 21~69(PAL), 14~83(NTSC) MISCELLANEOUS Supply voltage Power consumption Operation temperature Storage temperature Dimension (W * D * H) Weight 100~240VAC~50~60Hz Max.
