Operation Manual

24
Menu Operations
if this function is “Standard” or “Teletext Subtitle”. If this function is “Off”
subtitles won’t be displayed.
2. OSD Timeout: This setting determines the duration the info window is
displayed on the screen when you change channels. Press [Vol◄/►] to set
the time between 1 to 10 seconds.
3. Position: Press [Vol◄/►] select the position between top and bottom.
4. OSD Transparency: With this parameter you can set the transparency of
the menus. Press [Vol◄/►] select the value between 10%, 20%, 30%,
40% and “Off”(means no transparency function).
5. Logo From USB: Press [Vol◄/►] to select “Off” and “On”. Set the image as
background.
6. Load OSD Setting Default: If you want to reset your OSD settings to the
default settings then select this item and press [OK].
7. Press [Exit] button to leave the “OSD Setting” menu.
5.2 TV System
When you enter the “TV System” menu you
will see the screen like below:
1. Display Mode is used to switch the
display mode. You can select from
PAL / NTSC. Press [Vol◄/►] to switch
the desired mode.
2. Aspect Mode is used to switch the
screen aspect ratio mode. You can
select the needed mode from Auto /
4:3 PS / 4:3 LB / 16:9 with [Vol◄/►].
3. Video output is use for switching the screen aspect ratio mode. Now we
provide below options: SD / HD. You can press [Vol◄/►] key to select
each mode circularly.
4. Digital Audio Out is used to switch the output audio mode. You can select
the needed mode from LPCM Out / BS Out with [Vol◄/►].
5. Press [Menu/Exit] to return to the previous menu.