Operation Manual

Basic Operations

2.9 TXT

1. Press [TXT] button in TV mode to

open the teletext page. This service is

depending on the support of the

channel provider.

2. If the channel does not support

teletext information, it will show “No

Teletext Data” on the screen.

2.10 P/N

In TV mode, press [P/N] button to display Mode is used to switch the display

mode.

2.11 RECALL

Pressing the [Recall] button allows you to toggle between the actual and the

last selected channel.

2.12 Channel Number

In TV mode you can enter the channel number directly with your remote control

unit and confirm the number with the OK button to change to the desired

channel.

2.13 PGUP / PGDN

In TV mode, press [PGUP / PGDN] to switch directly between satellites.

2.14 SAT

1. In TV mode, press [SAT] button to

open channel list and select there,

then press [OK] to open “TV Channel

List” menu, select channel of the

current.

2. In TV mode, press [Page Up/Down] to

switch directly between satellites.