Operation Manual

&)+
FLH=K?:;
H^iZeVgVYdlcadVY#
&#@beaVnZg
&]iie/$$'Wl^i]j#i^hidgn#Xdb$')*
'9dlcadVY'[^X]Z^gdheVgV&eVhiVZYZhXdbeVXiZd
Vgfj^kdVgbVoZcVYd#6ehYZhXdbeVXiVg!kdXedYZ
^chiVaVgVeZcVhXa^fjZZmZ#
'#9^kmBVc\Zg
&>cY^XVgZhiZh^iZ/
]iie/$$lll#bdY^m)j#Xd#`g$jeWdVgY$k^Zl#Vhe4[Xeg^b`Zn2))
'8a^fjZVWV^mdeVgVVkZghd>c\ah
147
1Check that the power cable is plugged into the power
socket.
1Check the dish and adjust it.
1Check the cable connection and correct it.
1Check channel and video output.
1Check the volume level of the TV and receiver.
1Check the mute status of TV and receiver.
1Check the cable connection and correct.
1Replace batteries.
1Aim the remote control unit directly to the receiver.
1Checking that nothing blocks the front panel.
1Check the Conditional Access Module and smart card are
appropriate for the selected service.
1Check the Conditional Access Module and smart card are
correctly inserted or not.
1Check the signal strength and the signal quality in the
menu.
1Check the LNB and replace the LNB if necessary.
1Check the LNB cable.
1Check the Dish and adjust it.
1Go to the Option and select System Information.
1Contact your Service Provider.
Problem
Nothing appears on the Front
Panel or No power supply
No Picture
No Sound
Remote Control Unit dose not
work
Service is not running or
scrambled
“No Signal” on the screen
Tuner Defective Check
You have forgotten your
secret PIN Code
Solution
TROUBLESHOOTING