Operation Manual

&+'
FLH=K?:;
H^iZeVgVYdlcadVY#
&#@beaVnZg
&]iie/$$'Wl^i]j#i^hidgn#Xdb$')*
'9dlcadVY'[^X]Z^gdheVgV&eVhiVZYZhXdbeVXiZd
Vgfj^kdVgbVoZcVYd#6ehYZhXdbeVXiVg!kdXedYZ
^chiVaVgVeZcVhXa^fjZZmZ#
'#9^kmBVc\Zg
&>cY^XVgZhiZh^iZ/
]iie/$$lll#bdY^m)j#Xd#`g$jeWdVgY$k^Zl#Vhe4[Xeg^b`Zn2))
'8a^fjZVWV^mdeVgVVkZghd>c\ah
163
2Check that the power cable is plugged into the power
socket.
2Check the dish and adjust it.
2Check the cable connection and correct it.
2Check channel and video output.
2Check the volume level of the TV and receiver.
2Check the mute status of TV and receiver.
2Check the cable connection and correct.
2Replace batteries.
2Aim the remote control unit directly to the receiver.
2Checking that nothing blocks the front panel.
2Check the Conditional Access Module and smart card are
appropriate for the selected service.
2Check the Conditional Access Module and smart card are
correctly inserted or not.
2Check the signal strength and the signal quality in the
menu.
2Check the LNB and replace the LNB if necessary.
2Check the LNB cable.
2Check the Dish and adjust it.
2Go to the Option and select System Information.
2Contact your Service Provider.
Problem
Nothing appears on the Front
Panel or No power supply
No Picture
No Sound
Remote Control Unit dose not
work
Service is not running or
scrambled
“No Signal” on the screen
Tuner Defective Check
You have forgotten your
secret PIN Code
Solution
TROUBLESHOOTING