Operation Manual

Remote Control & Panel Description

1.2 Rear Panel Description

1. RS-232: Serial Port allowing software upgrades.

2. IF IN: Satellite input.

3. IF OUT: Satellite output for cascading to other devices

Note: The operation of another receiver at the same time is only possible with limited

channel selection.

4. S/PDIF: Coaxial output for digital audio (AC3)

5. VIDEO: CVBS video output for TV AV in.

6. AUDIO: HiFi outputs for stereo set.

7. USB: To connect with USB disk.

8. ETHERNET: Connect to the network.

9. HDMI: HDMI output for the connection to a TV set.

10. AC IN: Mains input cable.

11. POWER ON/OFF: Allows to completely switch off the receiver.