Operation Manual

Menu Operations
25
7. PS Record: Press [Vol◄/►] to switch this function “No” or “Yes”.
8. Press [Save] to confirm it. Press [Cancel] to leave the “Time Setting” menu.
3.3.6 Parental Lock
In “Parental Lock” menu;
You can set a password for anyone who wishes to operate the “Installation” menu. You can also
set the password to lock channels. Below you find how to set and change the password.
1. On “Parental Lock” press [OK] to open a dialogue box and input the password. After you
entered the correct password, you will see a screen like beside:
2. Menu Lock: If Menu Lock is set to “Yes” then you need to enter the password every time you
want to open the menu. If set to “No” then you can open the menu without entering the
password first.
3. Channel Lock: If set to “Yes” then you need to enter the password before you can see those
channels which have been marked as locked channels in the channel menu. If set to “No”
then even those channels can be selected without entering the password first.
4. New Password: Here you can change the existing password. You should do this after you
set up the receiver the first time and every time when you think that your password is known
by unauthorized persons. To change the password enter the new password in the “New
Password” item and repeat the same one in the “Confirm Password” item. If the passwords
are not identically then you will see a warning message. If you entered the same new
password in both fields then you will see the message “Saving Data, Please Wait…”. From
now on you need to use the new password to open locked menus or locked channels.
NOTE: The default password is 0000.
5. Press [Exit] to leave the “Parental Lock” menu.