Operation Manual

Menu Operations
24
3. The “GMT Offset” item is only available when “GMT Usage” is set to “On”. Press [Vol◄/►]
to set the “GMT Offset” value. With every time you press the button the time offset will be
increased /decreased by half an hour.
4. Summer Time: Press [Vol◄/►] to switch this function “On” or “Off”.
5. “Date” and “Time” items are only available when the “GMT Usage” is set to “Off”. Press
[Vol◄/►] to select one item and use number buttons to input time and date directly.
6. NOTE: If the current channel provides the correct time information, you will see the current
time after you entered “Local Time Setting” menu. If the channel doesn’t provide time
information, you have to input the date and time information manually. The most channels
support the time signal.
7. Press [Exit] to leave the “Local Time Setting” menu.
3.3.5 Time Setting
In “Time Setting” menu;
You can press [CH▲/▼] to switch the timer number. There are totally 8 timers.
1. Timer Mode: Select how often the timer is running: Once, Daily, Weekly, Monthly and Yearly,
or switch the timer to off.
2. Timer Service: Select between TV Channel, Radio Channel and Message.
3. Wakeup Channel: Press [OK] to enter the channel list, and select the channel you want to
see with [CH▲/▼], press [OK] to confirm it.
4. Wakeup Date: Use number buttons to input your wakeup date.
5. On Time: Use number buttons to input your wakeup time. If date and time are reached then
no matter if the system is in standby mode or in playing mode, it will automatically switch to
the channel you set and start to play.
6. Duration: Here you can set the time you want to see or play this channel. When the time is
reached, whenever the system is in standby mode or playing a channel, the system will
automatically switch to the channel you select and play the channel within the duration time
you set. The minimum duration unit is one minute. After the duration time, the system will
automatically switch to Standby mode.