Operation Manual

Menu Operations

2. FTA Only: Press [Vol◄/►] to select to scan only free channels or even scrambled channels.

If you select “Yes” it will scan free channels only.

3. Scan Channel: Press [Vol◄/►] to select to scan TV + radio, or just TV or just radio.

4. Network Search: Press [Vol◄/►] to select to scan Yes or No.

5. Scan Mode: You can select “Auto Scan” or “Preset Scan” to blind scan preset transponders

or network transponders of the selected satellite.

6. Search: Press [OK] to start scanning. In the lower part of the window the progress of

scanning and the found channels are displayed.

3.1.5 Multi Satellite Search

Basically the operation of “Multi Satellite Search” is same as “Single Satellite Search”, You c an

select several satellites in this menu..

3.1.6 TP List

In “TP List” menu;

1. Press [Vol◄/►] to change the marked satellite.

2. Press [Red] button to open the “Edit TP” menu. Here you can edit the transponder’s data.

3. Press [Green] button to open the “Add TP” menu. Here you can add a new TP and setup its

parameters.

4. Press [Yellow] button will open a dialog box asking you to confirm the deletion of the current

TP. If you select “OK” all the related channels will be deleted. If you select “Cancel” the

operation will be cancelled.

5. Press [Blue] to start scanning. In the lower part of the window the progress of scanning and

the found channels are displayed.