Operation Manual

Menu Operations
17
1. In the “Satellite” item press [OK] to select the “satellite list” to select directly with [CH▲/▼],
press [OK] to confirm it.
2. In the “LNB Type” item press [OK] to select the “LNB Type list” to select directly with
[Vol◄/►], press [OK] to confirm it.
3. In the “Transponder” item press [OK] to select the “Transponder list” to select directly with
[CH▲/▼], press [OK] to confirm it.
4. In the “DiSEqC1.0” item press [OK] to select the “DiSEqC1.0 list” to select directly with
[CH▲/▼], press [OK] to confirm it.
5. In the “22K” item press [OK] to select the “ON” & “Off” to select directly with [CH▲/▼], press
[OK] to confirm it. The 22KHz signal is used in KU universal LNBs to change between low
band and high band.
6. In the “Polarity” item: Press [Vol◄/►] to switch between “Auto / H / V/ Off”.
3.1.4 Single Satellite Search
In “Single Satellite Search” menu;
1. In the “Satellite” item press [OK] to open the “satellite list” to select directly with [CH▲/▼],
press [OK] to confirm it.