Operation Manual

44
Menu Operations
¾ Wakeup Channel: Press [OK] to enter the channel list, and select
the channel you want to see with [CH▲/▼], press [OK] to confirm
it.
¾ Wakeup Date: Use number buttons to input your wakeup date.
¾ On Time: Use number buttons to input your wakeup time. If date
and time are reached then no matter if the system is in standby
mode or in playing mode, it will automatically switch to the channel
you set and start to play.
¾ Duration: Here you can set the time you want to see or play this
channel. When the time is reached, whenever the system is in
standby mode or playing a channel, the system will automatically
switch to the channel you select and play the channel within the
duration time you set. The minimum duration unit is one minute.
After the duration time, the system will automatically switch to
Standby mode.
♦ When you select “Message”(reminding message) option in “Timer
Service” then you can enter additional data:
¾ Wakeup Message: Press [Vol◄/►] to select the category
¾ of the wakeup message from Birthday, Anniversary and General.
¾ Wakeup Date: Use the [Number] buttons to input your wakeup
date.
¾ On Time: Use the [Number] buttons to input your wakeup time. If
date and time are reached, no matter if the system is in standby
mode or in playing mode, it will automatically show a reminding
message. The message will be displayed on the screen until you
press [Exit] to close it.
¾ Duration: Here you can set the time you want to see or play this
channel. When the time is reached, whenever the system is in
standby mode or playing a channel, the system will automatically
switch to the channel you select and play the channel within the
duration time you set. The minimum duration unit is one minute.
After the duration time, the system will automatically switch to
Standby mode.
♦ Press [Exit] to leave the “Timer” menu.