Operation Manual

34
Menu Operations
6.2.3 OTA Upgrade
This function can upgrade the software of
your receiver through data sent by a
satellite. At the moment we offer satellite
updates only through ASTRA1 and Hotbird
satellites.
1. Select the satellite and TP or input the
TP value and download PID.
2. Then mark “Start” and press [Enter] to
begin the download of the upgrade.
This may need up to 60 minutes. Therefore we suggest using of this
function only if you don’t intent to watch TV during this time.
3. Auto OTA Config: The system could upgrade automatically in standby
mode.
6.3 Factory Default
When you press [OK] on the “Factory
Default” item:
1. A dialogue box will occur where you
need to enter the password.
2. After you input the correct password a
warning message will be displayed
like the one beside.
3. If you select “Yes” then all changes
you made will be reset to default
values. Make sure you really want to do this!
4. Press [Exit] in both steps will close the window without resetting the
receiver.