Operation Manual

29
Menu Operations
♦ The “GMT Offset” item is only available when “GMT Usage” is set to
“On”. Press [Vol◄/►] to set the “GMT Offset” value. With every time
you press the button the time offset will be increased/decreased by
half an hour.
♦ Summer: Press [Vol◄/►] to switch this function “On” or “Off”.
♦ “Date” and “Time” items are only available when the “GMT Usage” is
set to “Off”. Press [Vol◄/►] to select one item and use number
buttons to input time and date directly.
♦ Time Display: Press [Vol◄/►] to switch this function “On” or “Off”.
NOTE: If the current channel provides the correct time information,
you will see the current time after you entered “Local Time Setting”
menu. If the channel doesn’t provide time information, you have to
input the date and time information manually. The most channels
support the time signal.
♦ Press [Exit] to leave the “Time” menu.
2. Sleep Timer: Select “Sleep Timer” item and press [OK] to set the sleep
timer. You will see “Sleep timer OFF / Sleep timer 10 / Sleep timer 30 /
Sleep timer 60 / Sleep timer 90 / Sleep timer 120”.
If you set a sleep time, the system will change to standby mode after the
chosen time period.
5.5 Parental Lock
You can set a password for anyone who
wishes to operate the “Installation” menu.
You can also set the password to lock
channels. Below you find how to set and
change the password.
1. On “Parental Lock” press [OK] to open
a dialogue box and input the password.
After you entered the correct password,
you will see a screen like beside:
Menu Lo
2. ck: If Menu Lock is set to “Yes” then you need to enter the
password every time you want to open the menu. If set to “No” then you
can open the menu without entering the password first.