Operation Manual

22
Menu Operations
22K: Use [Vol◄/►] to switch “ON” and “Off”. The 22KHz signal is used in
KU universal LNBs to change between low band and high band.
! Notice: After choosing LNB type “Universal” you cannot modify 22K.
DiSEqC1.0: Use [Vol◄/►] to switch the options or press [OK] to open the
DiSEqC1.0 option list to select directly with [CH▲/▼], press [OK] to
confirm it.
DiSEqC1.1: Use [Vol◄/►] to switch DiSEqC1.1 option or press [OK] to
enter DiSEqC1.1 option to select directly with [CH▲/▼], press [OK] to
confirm it. The options of this item are: Disable / CCard1 M1 Port1 /
CCard1 M1 Port2 / CCard1 M1 Port3 / CCard1 M1 Port4 / CCard1 M2
Port1 / CCard1 M2 Port2 / CCard1 M2 Port3 / CCard1 M2 Port4 / CCard1
M3 Port1 / CCard1 M3 Port2 / CCard1 M3 Port3 / CCard1 M3 Port4 /
CCard2 Port1 / CCard2 Port2 / CCard2 Port3 / CCard2 Port4 / CCard2
Port5 / CCard2 Port6 / CCard2 Port7 / CCard2 Port8 / CCard2 Port9 /
CCard2 Port10 / CCard2 Port11 / CCard2 Port12 / CCard2 Port13 /
CCard2 Port14 / CCard2 Port15 / CCard2 Port16.
Positioner: Press [Vol◄/►] to select between “Off / DiSEqC1.2 / USALS”.
! Notice: When you select “DiSEqC1.2 or USALS”, “DiSEqC1.0” and
“DiSEqC1.1” items will be disabled.
Polarity: Press [Vol◄/►] to switch between “Auto / H / V ”.
Toneburst: Press [Vol◄/►] to switch this function “On” or “Off”.
5. After you completed your modification, on the “TP Scan” item, press [OK]
twice to start scanning.
4.4 Satellite List
When you enter the “Satellite List” menu you can see a window like the one
beside: