Operation Manual

Menu Operations

! Notice: After choosing LNB type “Universal” you cannot modify 22K.

DiSEqC1.0: Use [Vol◄/►] to switch the options or press [OK] to open the

DiSEqC1.0 option list to select directly with [CH▲/▼], press [OK] to

confirm it.

DiSEqC1.1: Use [Vol◄/►] to switch DiSEqC1.1 option or press [OK] to

enter DiSEqC1.1 option to select directly with [CH▲/▼], press [OK] to

confirm it. The options of this item are: Disable / CCard1 M1 Port1 /

CCard1 M1 Port2 / CCard1 M1 Port3 / CCard1 M1 Port4 / CCard1 M2

Port1 / CCard1 M2 Port2 / CCard1 M2 Port3 / CCard1 M2 Port4 / CCard1

M3 Port1 / CCard1 M3 Port2 / CCard1 M3 Port3 / CCard1 M3 Port4 /

CCard2 Port1 / CCard2 Port2 / CCard2 Port3 / CCard2 Port4 / CCard2

Port5 / CCard2 Port6 / CCard2 Port7 / CCard2 Port8 / CCard2 Port9 /

CCard2 Port10 / CCard2 Port11 / CCard2 Port12 / CCard2 Port13 /

CCard2 Port14 / CCard2 Port15 / CCard2 Port16.

Positioner: Press [Vol◄/►] to select between “Off / DiSEqC1.2 / USALS”.

! Notice: When you select “DiSEqC1.2 or USALS”, “DiSEqC1.0” and

“DiSEqC1.1” items will be disabled.

Polarity: Press [Vol◄/►] to switch between “Auto / H / V ”.

Toneburst: Press [Vol◄/►] to switch this function “On” or “Off”.

3. DiSEqC1.0 4Port: Use [Vol◄/►] to switch the options of DiSEqC1.0.

Between Disable / LNB1 / LNB2 / LNB3 / LNB4.

4. TP Index: Use [Vol◄/►] to select the desired transponder or press [OK] to

open the TP list to select directly with [CH▲/▼], press [OK] again to

display the TP number where the channel can be found.

5. FTA Only: Press [Vol◄/►] to select to scan only free channels or even

scrambled channels. If you select “Yes” it will scan free channels only.

6. Scan Channel: Press [Vol◄/►] to select to scan TV + radio channels, or

just TV channels or just radio channels.

7. Scan Mode: You can select “Auto Scan”, “Preset Scan” or “NIT Search” to

blind scan preset transponders or network transponders of the selected

satellite.

8. Search: Press [OK] to start scanning. In the lower part of the window the

progress of scanning and the found channels are displayed.