Operation Manual

17
Menu Operations
1. Press [OK] on the “Satellite” item to
display the satellite list. You can select
the satellite for which you want to
create a new channel.
2. With marked “TP Index” item press
[OK] to display TP list, use [CH▲/▼] to
select for which you want to create a
new channel. Press [OK] to display the
TP number where the channel can be
found. The next three items will show the related parameters.
3. Highlight the “Name” item and press [OK] to display the button pad and edit
the new channel’s name. In “Video PID”, “Audio PID” and “PCR PID” items
you can enter the numbers directly to set these parameters of the new
channel.
4. After modification select “Save” and press [OK] to save the new channel
and leave the edit mode. Select “Exit” and press [OK] to exit the edit mode
without saving the new channel.
3.1.5 Find
1. Press [Blue] button to open the “Find”
window like showed beside. Press
[CH▲/▼] / [Vol◄/►] to select the
leading character of the channel name
and press [OK] to confirm it.
2. After entering the character(s) highlight
“OK” in the window and press
[OK] on
the RCU.
3. Press [Exit] button to close the find
window and brings you back to the channel list.
3.2 Radio List
Basically the operation of “Radio Channel List” is same as “TV Channel List”,
except that in the small channel window the radio Logo will be displayed.