Datasheet
KVM HDMI over IP PoE Extender Kit
500770
© MuxLab Inc. 2016 KVM HDMI over IP PoE Extender Kit
Overview:
The KVM HDMI over IP PoE Extender Kit allows HDMI &
USB equipment to be connected up to 330ft (100m) over an
Ethernet LAN, supporting 1920x1200 and 1080p resolution @
60Hz via Cat5e/6 cable in multiple point-to-point and point-
to-multipoint configurations. The Transmitter (500770-TX)
and Receiver (500770-RX) support PoE (PD) if used with a
PoE (PSE) Ethernet Switch.
The Transmitter terminates to a computer server/workstation
via an HDMI & USB port, The Receiver terminates to an
HDMI display and up to 4 USB devices such as a keyboard,
mouse, printer, drawing pad, storage device, camera, etc., via
a 4 port USB hub. A single Receiver can be switched via
hotkey sequences to any Transmitter on the network, allowing
a single operator to manage numerous servers/workstations, in
a distributed KVM application.
Applications:
Management of multi-server systems supporting HDMI
displays in IT departments within corporations, educational
institutions, CAD Design, Graphic Design, Media Servers, and
Data Centers.
Key Features:
One operator can manage multiple servers/workstations
Supports HDMI up to 1920x1200 and 1080p @ 60Hz
Receiver side includes a 4-port USB hub, for KVM applications
Up to 330ft (100m) over Cat5e/6
Supports 100’s of Transmitters & Receivers depending on network
bandwidth
Supports multiple point-to-point, and point-to-multipoint
applications
Supports audio insert & mic-out (TX), and audio extract & mic-
in (RX)
Specifications
Environment
HDMI 1.4
Devices
Computers and servers with HDMI monitor ports.
Transmission
Transparent to the user
Bandwidth
300MHz
Signals
HDMI 1.4 protocol, HDCP 1.4
Connectors
Note: Cables not included.
One (1) HDMI receptacle.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
Two (2) 3.5mm jacks for audio insert (on TX)/audio extract (on RX).
One (1) 2.1mm locking barrel jack for power
One (1) or Four (4) USB Connector(s) for Host (on TX)/Client (on RX)
Four (4) DIP Switches for device ID addressing.
Maximum Distance
Based on a maximum length of
6.6ft (2m) of HDMI cable per end.
Cat5e/6: 330ft (100m) up to 1920x1200 and 1080p @ 60Hz
Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection
reduces the effective distance depending on the grade of twisted cable used.
Latency
Typical one (1) Frame (16ms), maximum 2 frames (33ms)
Compression
JPEG 2000
Bandwidth
Up to 315Mbps
Network Requirement
1000BaseT with PoE
RJ45 Pin Configuration
Reverse Polarity Sensitive. Use
EIA/TIA 568A or 586B straight-
through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cables required
Power Source
This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE
(PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately.
PoE Standard
IEEE 802.3af
Power Consumption
Transmitter: 2.85Watt Receiver: 2.55Watt
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Dimensions
4.40” x 5.08” x 1.00” (112mm x 129mm x 25mm)
Weight
1.5lbs (0.68kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
3 years
Order Information
500770 KVM HDMI over IP PoE Extender Kit (UPC: 67699007709)
500770-TX KVM HDMI over IP PoE Extender TX (UPC: 67699907702)
500770-RX KVM HDMI over IP PoE Extender RX (UPC: 67699807705)
Accessories
(These items are sold separately)
500920 16-Port Rackmount Transceiver Chassis
500917 Wall Mount Transceiver Bracket Kit
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade