Datasheet
HDMI/RS232 Extender Kit, HDBT, UHD-4K
500454
© MuxLab Inc. 2017 500454
Overview
The HDMI/RS232 Extender Kit (500454) allows HDMI
equipment to be connected up to 131ft (40m) at 4K/30
(4:4:4) or 4K/60 (4:2:0) resolutions, or 230 ft (70 m) at
resolutions up to 1080p via one (1) Cat 5e/6 unshielded
twisted pair cable in a point-to-point configuration. The
unit supports RS232 and bidirectional IR for end
devices remote control. This kit comes with one (1)
transmitter, one (1) receiver, one (1) IR Emitter, and one
(1) IR sensor.
Applications
Digital signage, commercial AV systems, classroom
projector systems, boardroom systems, collaborative
PC systems, medical information systems.
Key Features
Supports 1080p deep color and full 3D to distances of
up to 230 ft (70m) over single Cat5e/6
Supports 4K @ 24/25/30Hz (4:4:4) and 4K/60 (4:2:0) to
distances of up to 131 ft (40m) over single Cat5e/6
Supports RS232
Supports Bi-directional IR pass through
Supports all digital audio modes
Includes IR emitter and IR sensor (carrier-wave)
Compatible with 500454-PoE
Specification Chart
Environment
HDMI 1.4a (3D)
Devices
DVDs, Blu-ray players, projectors, monitors, TVs, PCs, laptops, servers supporting HDMI.
Transmission
Transparent to the user
Bandwidth
340MHz
Signals
HDMI 1.4a protocol
Connectors
Cables not included
One (1) HDMI receptacle.
One (1) RJ45S for Cat5e/6 unshielded or shielded twisted pair.
One (1) DB9 for RS232.
Two (2) 3.5mm sockets for IR Sensor & Emitter (carrier-wave).
One (1) 2.1mm locking power connector.
Max. Distance*
*Based on a maximum length of 6.6
ft (2m) of HDMI cable per end
4K/30 (4:4:4): Cat 5e/6: 131ft (40m)
4K/60 (4:2:0): Cat 5e/6: 131ft (40m)
1080p: Cat 5e/6: 230ft (70m)
1080p Deep Color: Cat 5e/6: 230ft (70m)
When installed in an electrically noisy environment, STP cable must be used. Also, cross-
connection reduces the effective distance depending on the grade of twisted cable used.
RJ45 Pin Configuration
Reverse Polarity Sensitive
Use EIA/TIA 568 A or B, straight-
through wiring.
RJ45
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Category 5e or better twisted pair cables required.
Power Supply
Two (2) 110-240V/5VDC power supplies with interchangeable blades.
Power Consumption
Transmitter: 1.6 Watt Receiver: 3.2 Watt
Temperature
Operating: 0º to 40º C. Storage:-20º to 85º C. Humidity: up to 95% non-condensing.
Enclosure
Metal
Dimensions
4.40” x 3.00” x 1.00” (11.2 x 7.6 x 2.5 cm)
Weight
1.4 lbs (.6 kg)
Compliance
Regulatory: FCC, CE, RoHS, UL, cUL, TUV
Warranty
2 years
Order Information
500454 HDMI/RS232 Extender Kit, HDBT, UHD-4K (UPC: 627699004548)
500454-RX, HDMI/RS232 Receiver, HDBT, UHD-4K (UPC: 627699804544)
Accessories
500905 Rackmount Transceiver Chassis 3 Port
500920 Rackmount Transceiver Chassis 16 Port