User Manual

© MuxLab Inc. HDMI 4x4 Matrix Switch, HDBT Installation Guide
Page 9
3.3.
Pre-Installation Checklist
The HDMI 4x4 Matrix Switch, HDBT provides a centralized HDMI switching center
via UTP/STP cables.
1. The Matrix Switch is used in conjunction with MuxLab’s UTP/STP HDMI
Receiver (500454-RX or 500454-POE-RX).
2. The Matrix Switch is typically installed in a remote telecom room and is connected
to multiple video sources and display devices via Cat 5e/6 UTP/STP or HDMI
cables. A MuxLab Receiver is installed at each display to support the connection
to the Matrix Switch via a Cat 5e/6 cable.