VideoEase™ HDMI 3x1 Switcher Kit 500410 (110V) Installation Guide P/N: 94-00628-A SE-000627-A
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide Copyright Notice : Copyright © 2008 MuxLab Inc. All rights reserved. Printed in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise without prior written permission of the author. Trademarks : MuxLab and VideoEase are registered trademarks of MuxLab Inc.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide Table of Contents 1. Overview .........................................................................4 1.1. Description........................................................4 1.2. Features ………………………………………5 2. Technical Specifications ................................................6 3. Installation Procedure ...................................................8 3.1. Parts List ...........................................................8 3.2.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide 1. Overview 1.1. Description The VideoEase HDMI 3x1 Switcher Kit allows up to three (3) different HDMI sources to be connected to one (1) HDMI display via two (2) Cat5e unshielded twisted pair cables in a point-to-point configuration. The kit includes one transmitter and one receiver and supports up to 250 ft (75m) at 1080i via Cat5e cable.
© MuxLab Inc. 1.2.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide 2. Technical Specifications Environment Devices Transmission Bandwidth Signals Connectors Max. Distance HDMI 1.2 and DVI-D DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI or DVI-D Transparent to the user. 165MHz HDMI or DVI-D protocol Transmitter: Three (3) HDMI receptacles. Two (2) RJ45 Receiver: One (1) HDMI receptacle.
© MuxLab Inc.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide 3. Installation Procedure 3.1. Parts List The HDMI 3x1 Switcher Kit (500410 [110V]) comes with the following parts. Please verify that all pieces are present before proceeding. • Transmitter • Receiver • One (1) External Power Supply (12 VDC) • One (1) AC Power Cord • Installation Guide HDMI jumper cables and Category 5 cable are not included.
© MuxLab Inc. 3.2. HDMI 3x1 Switcher Kit Installation Guide Product Overview The external connections and diagnostic indicators of the HDMI 3x1 Switcher are detailed in the following diagrams. Please familiarize yourself with them before installing the components.
© MuxLab Inc. 3.3. HDMI 3x1 Switcher Kit Installation Guide Pre-Installation Checklist There are two components: the transmitter and the receiver. 1. The transmitter is connected to the HDMI video sources which may be a satellite box, cable box, DVD player or game box via HDMI jumper cables (not included). 2. The transmitter is connected to the receiver by two (2) Category 5e (or higher) UTP cables (not included). 3.
© MuxLab Inc. 3.4. HDMI 3x1 Switcher Kit Installation Guide Installation Procedure Verify that the distance between the HDMI 3x1 Transmitter and Receiver is within MuxLab specifications (see Technical Specifications). In order to install the transmitter, please follow the steps below: 1. Connect the HDMI transmitter to the HDMI video sources with an HDMI jumper cable. 2. Connect two (2) Category 5e (or higher) UTP cables to the transmitter. Note: Verify that the cables are connected straightthrough (i.e.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide Note: Power on the HDMI 3x1 Switcher Kit only after all connections are made. 6. The following configuration. diagram shows the final 7. In order to select the HDMI source, press the Input Select button on the Transmitter or Receiver. The LED corresponding to the selected source will light up.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide 4. Troubleshooting The following table describes some of the problem symptoms, the probable causes and possible solutions. If the information below does not solve the problem, the technical support contact information can be found at the end of this section.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide When contacting your nearest MuxLab dealer or MuxLab Technical Support please have the following information ready: • Unit model number. • Cabling layout. Include models of HDMI equipment used, cable length and type. • Description of problem. • List of tests performed.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide 5. Product Warranty Policy Items under warranty - Company Policy MuxLab guarantees its products to be free of defects in manufacturing and workmanship for the warranty period from the date of purchase. If this product fails to give satisfactory performance during this warranty period, MuxLab will either repair or replace this product at no additional charge, except as set forth below.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide (1) month of receiving any returned product. The customer must provide MuxLab with the serial number and proof of purchase of the defective unit being returned. All R.M.A.’s issued are subject to inspection by MuxLab, and will be returned to customer if not properly package – units must be returned in original container or equivalent.
© MuxLab Inc. HDMI 3x1 Switcher Kit Installation Guide MuxLab Inc. Tel.: +1 (514) 905-0588 Fax: +1 (514) 905-0589 Toll Free (North America): 877 689-5228 URL: www.muxlab.com E-mail: videoease@muxlab.
