Instruction Manual

© MuxLab Inc. Audio 8x8 Matrix Switch Installation Guide
Page 39
12. Serial Port
serial
Description: Get all RS-232 settings
Arguments: <none>
Example: Get all RS-232 settings
serial
Response: Baud Rate: 9600
Data bits: 8
Stop bit: 1
Parity: NONE
(or an error message if the command failed)
serial -b <baud rate>
Description: Set the RS-232 baud rate
Arguments: <baud rate>: 9600, 19200, 38400, 57600 or 115200
Example: Set the RS-232 baud rate to 115200
serial –b 115200
Response: Baud Rate: 115200
Data bits: 8
Stop bit: 1
Parity: NONE
(or an error message if the command failed)
serial -o <data bits> <parity> <stop bits>
Description: Modify other RS-232 settings
Arguments: <data bits>: 7 or 8
<parity>: e, o or n (i.e: even, odd, none)
<stop bits>: 1 or 2
Example: Set the RS-232 settings to 8 data bits, no parity and 1 stop bit
serial –o 8 n 1
Response: Baud Rate: 115200
Data bits: 8
Stop bit: 1
Parity: NONE
(or an error message if the command failed)
serial –b <baud rate> -o <data bits> <parity> <stop bits>
Description: Modify all RS-232 settings
Arguments: <baud rate>: 9600, 19200, 38400, 57600 or 115200
<data bits>: 7 or 8
<parity>: e, o or n (i.e: even, odd, none)
<stop bits>: 1 or 2
Example: Set the RS-232 settings to a baud rate of 9600, 8 data bits, no parity and 1 stop bit
serial –b 9600 –o 8 n 1
Response: Baud Rate: 9600
Data bits: 8
Stop bit: 1
Parity: NONE
(or an error message if the command failed)