Instruction Manual

Page 37

7. Network (Continued)

Network –dhcp <dhcp state>

Description: Enable/disable DHCP feature

Arguments: <dhcp state>: on or off

Example: Enable the DHCP feature

Network –dhcp on

Response: IP: 10.0.1.101

MASK: 255.255.0.0

GATEWAY: 10.101.1.5

DHCP: ON

(or an error message if the command failed)

8. Password

password -wadmin <web admin password>

Description: Set the web server 'Admin' password

Arguments: <web admin password>: alphanumeric (max. length 20)

Example: Change the web admin password to new123

password -wadmin new123

Response: Web server Admin password set successfully

(or an error message if the command failed)

password -wuser <web user password>

Description: Set the web server 'User' password

Arguments: <web user password>: alphanumeric (max. length 20)

Example: Change the web user password to new123

password -wuser new123

Response: Web server User password set successfully

(or an error message if the command failed)

9. Preset

preset -s <preset #>

Description: Save the current connection in the selected preset

Arguments: <preset #>: 1 to 8

Example: Save current connection in preset 5

preset -s 5

Response: preset 5 saved successfully

(or an error message if the command failed)