Installation guide

Page 54

serial –b <baud rate> -o <data bits> <parity> <stop bits>

Description: Modify all RS-232 settings

Arguments:

<baud rate>: 9600, 19200, 38400, 57600 or 115200

<data bits>: 7 or 8

<parity>: e, o or n (i.e: even, odd, none)

<stop bits>: 1 or 2

Example: Set the RS-232 settings to a baud rate of 9600, 8 data bits, no parity and 1 stop bit

serial –b 9600 –o 8 n 1

Response: Baud Rate: 9600

Data bits: 8

Stop bit: 1

Parity: NONE

(or an error message if the command failed)

12. Status

status

Description: Display the unit status

Arguments: <none>

Example: Display the unit status

status

Response: Temperature: 28 Celsius

Voltage monitors: Ok

FANs:

- Fan 1: 2600 RPM

- Fan 2: 3200 RPM

- Fan 3: 2610 RPM

- Fan 4: 3300 RPM

Power supply:

- PSU 1: ON

- PSU 2: OFF

(or an error message if the command failed)

13. Version

version

Description: Get the current firmware version

Arguments:

<none>

Example: Get current firmware version

version

Response: Master firmware version: 1.4.0

Secondary micro version: 2

(or an error message if the command failed)