Installation guide

Page 45

alarm -n <method id> <state>

Description: Enable/disable a notification method.

Arguments:

<method id>: b (beep), s (serial) or all

<state>: on or off

Example: Disable the beep notification method

alarm –n b off

Response: Alarm notifications applied successfully !

(or an error message if the command failed)

2. Connection

connect -i

Description: Connect a specific input to a specific output

Arguments: <input port #>: 1 to 16

<output port #>: 1 to 16

Example: Connect input 5 to output 10

connect -i 5 -o 10

Response: [0,0,0,0,0,0,0,0,0,5,0,0,0,0,0,0]

(or an error message if the command failed)

connect -i <input port #> -o all

Description: Connect a specific input to all outputs

Arguments: <input port #>: 1 to 16

Example: Connect input 5 to all outputs

connect -i 5 -o all

Response: [5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5]

(or an error message if the command failed)

connect -i <input port #> -o <from output port #>..<to output port #>

Description: Connect a specific input to a consecutive range of outputs

Arguments: <input port #>: 1 to 16

<from output port #>: 1 to 16

<to output port #>: 1 to 16

<from output port #> shall be inferior or equal to <to output port #>

Example: Connect input 5 to outputs 8, 9, 10, 11, 12 and 13

connect -i 5 -o 8..13

Response: [0,0,0,0,0,0,0,5,5,5,5,5,5,0,0,0]

(or an error message if the command failed)

connect -json “[<input port #1>,<input port #2>,…, <output port #16>]”

Description: Make 16 connections/disconnections in one command using json format

Arguments:

<input port #>: 1 to 16 to specify the input port to connect to, or 0 to disconnect it

Example: Connect input 5 to outputs 8, 9, 10, and connect input 8 to outputs 1,2 , and disconnect all other

outputs.

connect -json “[8,8,0,0,0,0,0,5,5,5,0,0,0,0,0,0]”

Response: [8,8,0,0,0,0,0,5,5,5,0,0,0,0,0,0]

(or an error message if the command failed)