Specifications

ManualsBrandsMuxLab ManualsComputer equipment500415

8.34

Request the latest literature and guides from Anixter.

1.800.ANIXTER • anixter.com/literature

Copper-to-Copper Solutions - Baluns/Media Converters/Hubs/Distance Extenders

CCTV (Coax) over UTP - Baseband Video

Video Transmission, Media Conversion and Wireless

Transmitters;Passive/15211

Index1.Networking Systems//Video Products//Video Security Systems

NVT PR21691V2-125583.tif

The NVT model NV-226J-PV Video Transmitter and 12 V DC Converter is a passive

(nonamplified) video transmitter combined with a 24 V AC-to-12 V DC converter.

Designed to fit on the back of a fixed 12 V DC camera, this unit is architected to

convert 24 V AC power from the control room, while delivering real-time baseband

(composite) video at extended distances, all over one 4-pair UTP cable.

FEATURE

•Extended camera power and video (distance) routed through UTP and RJ45

•Supports 12 V DC cameras with onboard regulated power

•Use with NVT's PVD Power Supply Hubs and Cable Integrators

•Video up to 3,000 ft. with NVT's Active Receiver Hubs

•Video up to 750 ft. with NVT's Passive Receiver Hubs

•Supports "Up-the-Coax"-type control signals up to 750 ft.

•Exceptional interference rejection

•Built-in transient protection

•Limited lifetime warranty

Hubs;Power Supply/14213

Index1.Networking Systems//Video Products//Video Security Systems

NVT PR13607V2-31167.tif

The NVT models NV-4PS10-PVD and NV-16PS10-PVD are multichannel power

supply-integrator hubs which combine a one amp/channel power supply with

pass-through video and telemetry data, for up to four and 16 cameras respectively,

all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the

control/MDF room, they consolidate connectivity via standard 4-pair RJ45

ANSI/TIA-568-C.0 compliant premises wiring and pin-outs.

FEATURES

•Provides Class 2 SELV camera power, pass-through video and telemetry data

connection from four to 16 cameras, each via a single RJ45 4-pair UTP cable

•Standard telecom/datacom structured cabling pin-outs per ANSI/TIA-568-C.0

•Independently selectable 24 or 28 V AC with one amp max. per channel

•Automatic-reset fault protection, transient protection

•Individually floating outputs ensure total ground-loop immunity

•Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the

camera and passive or active receivers at the control room

•Power cameras via UTP over significant distances

•1U high; 12 in. deep; wall-, desk- or rack-mountable

•Limited lifetime warranty

ACCESSORIES

Hubs;Power Supply and Receiver/14214

Index1.Networking Systems//Video Products//Video Security Systems

NVT PR21692V2-125568.tif

The NVT models NV-4PS13-PVD, NV-8PS13-PVD and NV-16PS13-PVD are 4-, 8- and

16-channel hybrid power supply and passive receiver hubs. Designed for installation

in the MDF/equipment room, these hubs have independently selectable 24 V

AC-OFF-28 V AC outputs that can support channel at-distance camera loads up to one

amp per channel.

FEATURES

•Provides Class 2 SELV camera power, pass-through video and telemetry data

connection from eight to 16 cameras, each via a single RJ45 4-pair UTP cable

•Standard telecom/datacom structured cabling pin-outs per ANSI/TIA-568B

•Independently selectable 24 or 28 V AC with one amp max. per channel

(10 amp aggregate)

•Automatic reset fault protection and built-in transient protection

•Individually floating outputs ensure total ground-loop immunity

•Diagnostic LEDs show load/no load, mis-wires and overload conditions

•Use with the NV-216PV, NV-218-PVD or the NV-226J-PV transceiver at the

camera and passive or active receivers at the control room

•Power cameras via UTP over significant distances

•1U high; 12 in. deep: wall-, desk- or rack-mountable

•Limited lifetime warranty

ACCESSORIES

Single-channel Video Transmitter and 12 V DC Converter