Specifications

8.24
Request the latest literature and guides from Anixter.
1.800.ANIXTER • anixter.com/literature
Copper-to-Fiber Solutions - Transceivers/Media Converters/Multiplexers
Ethernet over Fiber
Video Transmission, Media Conversion and Wireless
D
Transceivers;Data/15014
Index1.Networking Systems//Video Products//Video Security Systems
INTERLOGIX PR21463V2-121584.tif
The Interlogix DE7400 Series Gigabit Ethernet 2-port transceiver is designed to
transmit and receive 1000 Mbps data over fiber or 10/100/1000 Mbps data over
Cat 5e electrical cable. It is available in any combination of electrical or optical
ports. The DE7400 is environmentally hardened to operate in extreme temperatures.
Loss of optical link contact closure for remote alarm sensing. Status-indicating LEDs
for power and data activity are present at the RJ45 connector. At the fiber optic
transceiver end, link and data LEDs provide operational status. Plug-and-play design
ensures ease of installation, requiring no optical adjustments. The modules are
available in either stand-alone or rack-mount versions.
FEATURE
S
•Full-duplex or half-duplex data
•Auto Network Detection MDI/MDI-X
•Designed to meet full compliance with the environmental requirements (ambient
operating temperature, mechanical shock, vibration, humidity with
condensation, high-line/low-line voltage conditions and transient voltage
protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal
Control Equipment
•Extended ambient operating temperature range: -40C to +74C
•No in-field optical adjustments required
•Power, transmit and receive data status LED indicators
•Loss of optical link contact closure
•Distances up to 30 km (18 miles)
•SC optical connectors standard
•IEEE 802.3 compliant
Systems;Fiber Fast Ethernet/3276
Index1.Networking Systems//Video Products//Video Security Systems
INTERLOGIX PR14977V2-33972.tif
The S714D provides fiber optic transmission of 100BASE-T Fast Ethernet data or
10BASE-T Ethernet data over distances up to 28 mi. (45 km). The S714D combines the
benefits of Interlogix's advanced engineering with the highest-quality standards in
the industry. The S714D makes it possible to add the security and efficiency of
transmission over fiber to local area networks (LANs) and other Ethernet
applications. Interlogix's unique SMARTS (Status Monitoring And Reliability Test
System) technology provides constant monitoring of the link and the equipment
connected to it. The status of the link and the system can be determined at a glance
without the use of expensive test equipment. Stand-alone modules are housed in a
rugged steel enclosure with a convenient, secure wall-mounting system.
FEATURE
S
•Supports 100BASE-T Fast Ethernet and 10BASE-T Ethernet protocols
•Automatic polarity correction
•Switch-selectable crossover
•Optical budget 13 dB
•Optical automatic gain control (OAGC)
•SMARTS diagnostics
MULTIMODE
SINGLE-MODE
10/100/1000 Mbps Gigabit Ethernet 2-port Transceiver
Anixter No. Vendor No. Description
359504 DE7400-M 2-port Gigabit Ethernet media
converter, 1 x 10/100/1000 TX
electrical, 1 x 1000 FX MM, 2F
359507 DE7400-S 2-port Gigabit Ethernet media
converter, 1 x 10/100/1000 TX
electrical, 1 x 1000 FX SM, 2F
S714D/S7714D Fiber Fast Ethernet System
Anixter No. Vendor No. Description
273597 S714DT-EST1 1-fiber link, 850/1300 nm, transmitter
342350 S714DR-EST1 1-fiber link, 850/1300 nm, receiver
273598 S714D-EST2 2-fiber link, 850 nm, transceiver
273599 S714D-EST2L 2-fiber link, 1300 nm, transceiver
Anixter No. Vendor No. Description
273600 S7714DT-EST1 1-fiber link, 1310/
1550 nm, transmitter
342354 S7714DR-EST1 1-fiber link, 1310/1550 nm, receiver
273601 S7714D-EST2 2-fiber link, 1310 nm, transceiver