00508 User Manual 4x4 HDMI Matrix Switch, 4K/60
Overview This product is a 4 in 4 out HDMI Matrix with Ultra HD up to 4k60 4:4:4 8bit HDR and HDCP2.2. It reliably distributes four HDMI source signal to four HDMI displays. Also provide audio de-embedded via coaxial port for each HDMI port. All output port support 4K scale down to 1080P. The product can be controlled by front panel buttons, IR, RS232, and IP/web UI. Also we provide API commands for your control system.
PRODUCT PHOTO
INTRODUCTION FEATURES ⚫ Distributes four HDMI sources signal to four HDMI displays ⚫ HDMI2.0 with 4K@60 4:4:4 8bit and HDCP 2.2 compliant ⚫ Support HDR 10 and Dolby version ⚫ Support 4K scale down to 1080P ⚫ Support remote control, button, RS232, Telnet & Web GUI ⚫ Support Audio DE-embed, coaxial audio out without display ⚫ Support 3D, Support deep color 30bit, 36bit ⚫ Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC ⚫ Digital audio format, pass through as DTS-HD/Dolby-trueHD/ LPCM7.
SPECIFICATIONS: 1) HDMI version………………………….. HDMI 2.0 2) HDCP version…………………………....HDCP2.2 3) HDMI resolution….…..24/50/60fs/4K*2K/1080p /1080i/720p/576p/576i/480p/480i 4) Support video format ........24bit/30bit,36bit deep color 5) Support audio format…………………….DTS-HD/ Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD/Dolby Atoms 6) Max bandwidth……………………………..600MHz 7) Max baud rate.……………………………..6Gbps 8) Input/Output TMDS signal ..0.5~1.
Operating and Connecting： 1.Connect one cable from each HDMI source devices to HDMI input. 2.Connect one cable from each display (monitor or projector) to the HDMI outputs.
Setting RS232 control Advanced user may need to control the matrix via RS232, connect a PC or control system. Professional rs232 serial interface software (e.g. UART Assist) may be needed as well. Before executing API commands through RS232, ensure the RS232 port of the matrix and control PC are set correctly. See below are main commands for control Note: All commands need typing ‘enter’ at the end.
EZS OUTx EXA EN EZS OUTx EXA DIS EZS OUTx STREAM ON EZS OUTx STREAM OFF EZS INx EDID y EZS HIP xxx.xxx.xxx.xxx Set Ex-Audio Output Enable {x=[0~4](0=ALL)} Set Ex-Audio Output Disable {x=[0~4](0=ALL)} Set Output x Stream ON {x=[0~4](0=ALL)} Set Output x Stream OFF{x=[0~4](0=ALL)} Set Input x EDID{x=[0~4](0=ALL), y=[0~32]} Set Host IP Address to xxx.xxx.xxx.xxx EZG HIP Get Host IP Address More details for EDID list and IP setting, please send “EZH” to get help list.
Sense Switch, select inputs for each output.
EDID Manage, select EDID for each input, there are more than 40 kinds of EDID options. System setting, set IP address and alias name.
Scaler setting Press the output select button for 3 seconds until the LED flash 3times, the output port scaler function will be on and will make 4K signal scale down to 1080p. Press the output select button for 3 seconds until the LED flash 1times and the output port scaler function will be off. For example You want to make output1 port scaler on.
