Instruction Manual
12
English
2. Can I control the device via 2G/3G/4G mobile
network?
The LED Wi-Fi bulb and the mobile device must be
under the same Wi-Fi network when the LED Wi-Fi bulb
is added for the first time. After successful configuration
of the device, you can control it remotely via 2G/3G/4G
mobile network.
3. How can I share my device with my family?
Open the application, go to “Profile” -> “Share device” ->
“Sent”, tap “Add shared device”, now you can share the
device with added family members.
4. How to reset this device?
Factory reset: after installing the bulb in a socket, switch
on, switch o for 3 seconds, switch on, switch o again
for 3 seconds and switch on for factory reset until the
light flashes rapidly.
Lamp status indicator lights:
- Fast flashing (twice per second): Fast mode setting is
initiated.
- Slow flashing (once every three seconds): AP mode
setting is initiated.
WARRANTY & TECHNICAL ASSISTANCE SERVICE
Terms and Conditions
innov8 Iberia guarantees the hardware and software*
included in this product for the term of two (2) years
in all its parts, against any defect of manufacture and
operation from the date of delivery to the final consumer
and without any cost for this one.
* Warranty on software applicable to the software
that contains the physical product, not on the control
application (App) within the consumer’s mobile devices.
To make this warranty eective, no further requirements
should be demanded than the shipment of this product
together with this warranty and the invoice or proof of
purchase.