User Manual

9
English
Check that your Wi-Fi network name is correct and
enter the Wi-Fi network password, click “Next”, follow
the scanning instructions and show the QR code from
your phone to the camera, when you hear 3 beeps click
on “I heard the beep”, after a few seconds you should
hear “Wi-Fi is connected”, click “Save” and the camera is
ready to use.
Note: Due to possible updates of the application, the
installation process of the product may change. Please
follow the instructions in the App itself for a correct
installation.
4. Control of the device
After successful configuration, the
device will be displayed on the
“Devices” page. Click on the device
icon to access the live view and
other functions such as manual
video recording, picture taking,
motion detection, event recording
(requires memory card) and siren
activation (manual only) among
other available functions.