Installation Guide

2 ©2020 Mutual Materials US OLD DOMINION 5/2020 www.MutualMaterials.com
With their pillow top
surface and tapered
corners, Mutual Materials®
Old Dominion pavers
oer a rustic appearance.
Old Dominion Squares
& Rectangles include
three sizes, and can be
installed in unique, random
patterns. Old Dominion
Circles make it easy to add
a circular patio, fountain
or other feature to your
outdoor living space.
Use the three styles alone,
or combine them for
truly unique, interesting
pavements using full circles,
half circles, sweeping
curves, fans and/or
traditional cobblestone
patterns.
Old Dominion pavers
are ideal for residential,
municipal and commercial
applications.
THE CIRCLE KIT
DEPTH RADIUS DIAMETER CIRCUMFERENCE** AREA OF CIRCLE PALLET WT
1 Pallet 2 ⁄" (6 cm) 41 ¾" (106 cm) 83 ½" (212 cm) 262 ¾" (615.8 cm) 39.27 ft (3.65 m) 1,150 lb (522 kg)
2 Pallets 2 ⁄" (6 cm)
58 ⁄" (148.4 cm)
116 ⁄" (296.8 cm) 367 ⁄" (932.7 cm) 78.54 ft (7.29 m) 1,150 lb (522 kg)
* All metric dimensions are soft converted to Imperial. Dimensions and coverage include ⁄" (3 mm) joint. Dimensions refer to completed circle.
** 262 ⁄" = 21.86 ft, 367 ⁄" = 30.6 ft
CIRCLE PRODUCT DATA*
CIRCLE PURCHASE REQUIREMENT
Old Dominion Circle must be purchased by the full pallet
(38.05 ft
2
).
CIRCLE INSTALLATION
One pallet of Old Dominion Circle will create a 6.96' diameter
circle, two pallets will create a 9.75' diameter circle. If you
would like to make an even bigger circle, use Old Dominion
Squares & Rectangles for additional bands of the circle—be
sure to mix the shapes together to keep joint spacing even.
The pallet layout and installation patterns for Old Dominion
Circle are below.
Important Considerations:
• The center is actually two-pieces which must be cut with a
masonry blade along the score lines.
• You must include an ⁄" (3 mm) joint between all pavers.
• Begin screeding sand and laying pavers from the center of
the circle.
1. 2 cut CP (2 CP)
2. 8 SR (8 SR)
3. Alternate 1 R with 1 SR all the way around (8 R, 8 SR)
4. Start with 1 R and then install all LR (1 R, 23 LR)
5. 3 LR, 1 R, 2 LR, 1 R, repeat all the way around (23 LR, 9 R)
6. Start with 1 R, then alternate 1 LR with 1 R (20 LR, 21 R)
7. Start with 1 LR, then alternate 1 LR with 1 R (25 LR, 24 R)
8. Start with 1 LR, then alternate 1 LR with 1 R (29 LR, 28 R)
9. Start with 1 LR, then alternate 1 LR with 1 R (33 LR, 32 R)
10. Start with 1 R, then alternate 1 LR with 1 R (36 LR, 37 R)
11. Alternate 1 LR with 1 R (40 LR, 40 R)
ROW PATTERNS