User`s guide

Rockhopper 38 – User’s Guide
Page 94 AP-75038, Rev. 1.0. – 27/05/04
Step 8:
Press the [VALUE+] key or [VALUE-] key to set the third part of the IP
address to a number between "001" and "255".
Step 9:
Press the [ENTER] key to confirm the third address and shift to the fourth
address.
Step 10:
Press the [VALUE+] key or [VALUE-] key to set the fourth part of the IP
address to a number between "001" and "255".
Step 11:
Press the [ENTER] key to confirm the fourth address and shift to the first
address.
Step 12:
Press the [BACK½] key.
Step 13:
Do not press any other keys for 3 minutes or press [BACK½] key again.
Step 14:
The permanent display is restored.
Plot OK
192.168 -> 041.015
192.168.001 -> 015
-> 192.168.001.007
*Menu* Network>