User`s guide

Rockhopper 38 – User’s Guide
Page 88 AP-75038, Rev. 1.0. – 27/05/04
5.4.3. RS-232C Setup
*Menu* RS-232C >
Baudrate 38400 / 19200 / 9600 / 4800
Data Length 8 bits / 7 bits
Parity
None / Odd / Even
StopBit
1 Bit / 2 Bits
Protocol
Hard / Xon / None
Setup CTS Control
Off / On
Factory default setting item is marked in Bold
The RS-232C Setup sets up the online concerning RS-232C connection.
5.4.3.1. Baudrate
Setting up the baudrate concerning RS-232 connection.
¾ 4800 bps, 9600 bps, 19200 bps, 38400 bps
5.4.3.2. Data Length
Setting up the data length concerning RS-232 connection.
¾ 7 bits, 8 bits
5.4.3.3. Parity
Setting up the parity concerning RS-232 connection.
¾ None, Odd, Even
5.4.3.4. Stop Bit
Setting up the stop bit concerning RS-232 connection.
¾ 1 bit, 2 bits
5.4.3.5. Protocol (Handshake)
Setting up the protocol concerning RS-232 connection.
¾ None, X on, Hard
5.4.3.6. Setup CTS Control
Setting up the CTS pin concerning RS-232 connection.
¾ On, Off