User`s guide

Rockhopper 38 – User’s Guide
Page 87 AP-75038, Rev. 1.0. – 27/05/04
Step 10:
Press [VALUE+] key or [VALUE-] key to enter the measured value digit.
Step 11:
Press [MENU UP¿] key or [MENU DOWNÀ] key to shift to another digit
that is to be altered.
Step 12:
Press [VALUE+] key or [VALUE-] key to enter the measured value digit.
Step 13:
Press [ENTER] key to confirm the "Distance Adjustment X-axial measured
value"
Step 14:
"Distance Adjustment" is restored. If no other settings are to be altered,
press [MENU UP¿] key.
Step 15:
Do not press any key for three minutes, or press [BACK½] key.
Step 16:
Stand-by status is restored.
Plot OK
*Menu* Function>
Real X: 00800.00
Real X: 00800.20
Real X: 00800.20
Real X: 00800.23
Distadj: Change