User`s guide

Rockhopper 38 – User’s Guide

Page 73 AP-75038, Rev. 1.0. – 27/05/04

5.4.1.8 Origin Reset

Step 1:

If a menu is to be specified, press the [MENU] key.

The key contents change to the purple section on the outside of the

operation panel.

Step 2:

Press the [ENTER] key to confirm the "Command" menu and shift to the

next level.

Step 3:

Bring up the "OriginReset" item by pressing the [MENU UP¿] key or

[MENU DOWNÀ] key.

Step 4:

Press the [VALUE+] key or [VALUE-] key to select "No" or "Yes".

Step 5:

Press the [ENTER] key to confirm "Command: OriginReset" and shift to the

next item to be set.

Step 6:

If no other items are to be changed, press the [BACK½] key.

Step 7:

Do not press any other keys for 3 minutes or press [BACK½] key again.

Step 8:

The permanent display is restored.

Plot OK

*Menu* Command>

OriginReset: No

OriginReset: Yes

Command: RTL-PASS