User`s guide

Rockhopper 38 – User’s Guide

Page 65 AP-75038, Rev. 1.0. – 27/05/04

DISPLAY EXAMPLE STEPS

Step 5:

Look at pattern B on your printed sheet.

Select the row number of the line where no shift is

visible. To change values, use VALUE + and

VALUE - keys.

Step 6:

Press ENTER key to confirm the value of pattern B.

Step 7:

Look at pattern C on your printed sheet.

Select the row number of the line where no shift is

visible. To change values, use VALUE + and

VALUE - keys.

Step 8:

Press the ENTER key to confirm the value of

pattern C.

Step 9:

Going back to the standard display indication.

Note:

The fine adjustment function is to adjust the position of the colour print head (Pattern B),

the position of black print head (Pattern A) and the position between the colour print

head and the black print head (Pattern C).

During the adjustment procedure, the settings will not be changed if interruptions

happen, such as pressing the cancel key, lifting the hold lever up during the operation

or pressing enter without changing any values.

Pattern B: [5]

Pattern C: [5]

Pattern C: [4]

PLOT OK