User`s guide

Rockhopper 38 – User’s Guide
Page 59 AP-75038, Rev. 1.0. – 27/05/04
5.3.2. Nozzle Check
After filling the inks, this procedure uses printing results to check whether the head nozzles are
ejecting the ink properly. If the nozzles are ejecting ink badly, implement the cleaning treatment
in this procedure. If there is no media, the printer will request media. If it is out of ink, it will ask
for an ink cartridge. If there is media and ink, the Head Nozzle Check Pattern will be plotted.
+
Note:
¾ If there are cartridges but the ink has not been filled, the printer will still start printing.
This and subsequent items that require printing for adjustment or checking include requests for media and
inks. If the [CANCEL] key is pressed during printing, the printer will stop printing.
Head Nozzle Check Pattern
Check Items Nozzle ink eject check (missing, discontinuous, meandering)
Satellite