User`s guide

Rockhopper 38 – User’s Guide
Page 58 AP-75038, Rev. 1.0. – 27/05/04
5.3. SHIFT KEY OPERATIONS
5.3.1 Overview
Shift + Function
1 Head Adjustment
Alignment
+
SHIFT + HEAD ADJUSTMENT launches the head
calibration procedure. This procedure already has
been carried out in the factory.
Do not use this function if you have not been
instructed and trained to do so.
2 Roll Media Feed
+
SHIFT + ROLL MEDIA ADVANCE allows the user to
manually advance the media forward or backward.
This function is helpful when some area of the media
is dirty or damaged. In this case, feed the media
forward and press the CANCEL key to automatically
sheet-off. Please note this function will only work
using ROLL MEDIA.
3 Nozzle Check
+
SHIFT + NOZZLE CHECK outputs the nozzle check
pattern.
4 Test Plot
+
SHIFT + TEST PLOT generates a test plot.
5 Set-up List
+
SHIFT + SETUP LIST plots out the printer’s user
definable settings. It is best to print these settings
after your printer is set-up and fully functional. It will
help you to reset your printer to the correct settings
when some parameter is changed unwontedly. Also
the printer settings print is a helpful document to have
at hand when calling your distributor, dealer or Mutoh
authorized service centre.