User`s guide

Rockhopper 38 – User’s Guide
Page 53 AP-75038, Rev. 1.0. – 27/05/04
5.2.3. High quality / Standard / High speed selection
The Rockhopper 38 printer can be set-up in three speed / quality modes.
Quality and speed are inversely proportional: the higher the speed, the lower the
quality and vice versa.
By pressing the Quality / Speed key, the LED of the selected printing mode will
light. Continue pressing this key until you reach the desired mode.
The available printing modes are:
High quality - Presentation:
When selecting this mode, printing is nicer than in standard
mode, but the printing speed is slower.
High quality LED is ON.
Normal mode:
Normal printing mode.
Standard LED is ON.
High Speed - Economy mode:
Printing speed is the priority.
High speed LED is ON. Use this mode for your check / draft
prints.
Relationship between printing mode and resolution:
Printing mode 360 dpi 720 dpi
High quality
4-pass Uni-directional 8-pass Uni-directional
Standard
4-pass Bi-directional 4-pass Uni-directional
High speed
2-pass Bi-directional 4-pass Bi-directional