User`s guide

Rockhopper 38 – User’s Guide
Page 51 AP-75038, Rev. 1.0. – 27/05/04
5. HANDLING THE PRINTER
5.1. OVERVIEW OPERATION PANEL FUNCTIONALITY
Via your operation panel you can access a variety of functions in three different ways:
¾ Direct Access Keys
¾ Shift Key
¾ Menu Mode
5.2. DIRECT ACCESS KEYS OPERATIONS
5.2.1 overview
1 CANCEL
The CANCEL key is a special key, controlling both
the CANCEL FUNCTION as well as the ROLL
MEDIA CUT function.
Idle Status: Roll media is cut at the current position
Receiving Status: Process stops
Process Status: Buffer is cleared
Printing Status: Print is cancelled, Buffer is cleared
and the printed part is cut-off.
2 CLEANING Pressing CLEANING will start a cleaning cycle. To
perform a cleaning, the media hold lever must be
down and it is best that no media is loaded.
3 QUALITY / SPEED Pressing QUALITY / SPEED will change the output
quality and speed. Each time the key is pressed you
will notice the LED indicator showing the current
status: High Quality, Normal and High Speed
(Economy).
The set-up can only be changed in idle status.
4 RESOLUTION Pressing RESOLUTION will change the output
resolution between 720 x 720 DPI true resolution
and 360 x 360 DPI.
The set-up can only be changed in idle status.