User`s guide

Rockhopper 38 – User’s Guide
Page 143 AP-75038, Rev. 1.0. – 27/05/04
If only one optional memory chip is to be added, it should be inserted in slot 1 on the lower right of the board
with the nicked end of the chip at the right hand end of the slot. If two chips are to be added, they should be
inserted in slot 1 and slot 2 with the nicked ends of the chips at the right hand ends of the slots.
Slot 1
Slot 2
Additional Memory
Nicked End
Return the board box to its original position.