User`s guide

Rockhopper 38 – User’s Guide
Page 132 AP-75038, Rev. 1.0. – 27/05/04
Note:
When an error occurs in the XY drive systems, check for an obstruction in the XY drive
systems. If there is an obstruction, remove it before the power is switched on again.
Sensor detection error
A sensor cannot be detected.
NVRAM error
An error has occurred when writing to the flash ROM.
Sum-check error
A flash ROM sum-check error has occurred.
Note:
In the case of a Sensor detection error, NVRAM error or Sum-check error, switch on the
power again. If the error persists, contact the Mutoh authorized dealer.
Errors requiring restart that involve the CPU system
Standard DRAM error
An access error has occurred in standard DRAM.
Optional DRAM error
An access error has occurred in extended DRAM (option: sold
separately).
Interrupt exception error
An interrupt exception error has occurred in the CPU.
Command environment exception error
A command environment exception error has occurred in the
CPU.
Data environment exception error
A data environment exception error has occurred in the CPU.
Address exception error
An address exception error has occurred in the CPU.
Address exception error
An address exception error has occurred in the CPU.
E075 Error Abnormal Sensor
E129 Error NVRAM
E016 Error CPU Err [35]
E001 Error DRAM
E002 Error Opt. DRAM
E016 CPU Err [00]
E016 CPU Err [02]
E016 CPU Err [03]
E016 CPU Err [04]
E016 CPU Err [05]