User`s guide

Rockhopper 38 – User’s Guide
Page 124 AP-75038, Rev. 1.0. – 27/05/04
To connect with network (Ethernet)
Question Hint
To change the IP address Change "IP Address" in Network settings
To cut roll media
Question Hint
To feed and cut the finished part of a print Check that printing data are not being received
then feed the media by pressing the [MENU]
key while you are pressing the [Shift] key and
cut the roll media by pressing the [CANCEL]
key.
To place printed output in a specified position
Question Hint
To print in the middle of the page with maximum and
minimum data values?
Change "Direction" to "MAX-MIN"
To print on media of a different size from that specified in
the data
Set "Scale"
Examples of scales between standard sizes:
A4 / A3, A3 / A2, A2 / A1, A1 / A0, B4 / B3, B3 /
B2, B2 / B1 : 141%
A4 / B4, A3 / B3, A2 / B2, A1 / B1 : 122%
B4 / A3, B3 / A2, B2 / A1, B1 / A0 : 115%
B1 / A1, B2 / A2, B3 / A3, B4 / A4 : 86%
A0 / B1, A1 / B2, A2 / B3, A3 / B4 : 81%
A0 / A1, A1 / A2, A2 / A3, A3 / A4, B1 / B2, B2 /
B3, B3 / B4 : 70%
To print with reversed data? Set "Mirror" to Y-axis On
To use colour effectively
Question Hint
To print after changing the graphic quality Press the "Print Mode" key and select "High
Quality", "Normal" or "High Speed"
Change "Halftone" There are three type of tone
processing: "Speed", "Quality" and "Thin"
To print after changing the resolution Change "Resolution"
To print after mixing overlapping colours (over print) Change "Overwrite”