User`s guide

Rockhopper 38 – User’s Guide
Page 104 AP-75038, Rev. 1.0. – 27/05/04
5.4.6.4. Head Wash
When using this function, cleaning cassettes need to be installed to the cassette slots.
Black & Colour:
Washes both black head and colour head.
Black:
Washes black head only
Colour:
Washes colour head simultaneously
To change the Head Wash setup proceed as follows:
Step 1:
If a menu is to be specified, press the [MENU] key.
Step 2:
The key contents change to the purple section on the outside of the
operation panel.
Bring up the "Utility" menu by pressing the [MENU UP¿] key or [MENU
DOWNÀ] key.
Step 3:
Press the [ENTER] key to confirm the "Function" menu and shift to the next
level.
Step 4:
Bring up the "Head Wash" item by pressing the [MENU UP¿] Key or
[MENU DOWNÀ] Key.
Step 5:
Press the [VALUE+] key or [VALUE-] key to specify
“Black&Colour”,”Black” or “Colour”.
Only three selections are available on the menu. (Each colour head wash is
unavailable.)
Step 6:
Press the [ENTER] key to confirm the "Head Wash" and shift to next menu.
Step 7:
Replace waste ink box to new one.
Step 8:
Press [VALUE+] key or [VALUE-] key to select the "Yes"
Step 9:
Press the [ENTER] key to confirm "Yes"
Step 10:
Remove Black colour ink cassette from the slot.
Step 11:
Insert the cleaning cassette to the Black ink cassette slot.
The head wash starts when Eco-Solvent Plus cleaning cassette is inserted.
The cleaning period is approximately 12 minutes.
Step 12:
Remove the Eco-Solvent Plus cleaning cassette from the slot.
Plot OK
*Menu* Utility >
*Menu* Utility >
HeadW: Black&Colour
HeadW: Colour
HeadW: Black
Change Waste Eco-Solvent
Change Tank? No
Change Tank? Yes
Remove Bk Cart
Set Bk Wash Cart
Head Wash
Remove Bk Wash Cart