User`s guide

Rockhopper 38 – User’s Guide

Page 102 AP-75038, Rev. 1.0. – 27/05/04

Step 4:

Bring up the "Initial" item by pressing the [MENU UP¿] key or [MENU

DOWNÀ] key.

Step 5:

Press the [VALUE+] key or [VALUE-] key to specify "No" or "Yes".

Step 6:

Press the [ENTER] key to confirm "Initial" and shift to "Initial All".

Step 7:

Bring up the "Initial Network" item by pressing the [MENU UP¿] key or

[MENU DOWNÀ] key.

Step 8:

Press the [VALUE+] key or [VALUE-] key to specify "No" or "OK".

Step 9:

Press the [ENTER] key to confirm "Initial Network" and shift to "Initial All".

Step 10:

If no other items are to be changed, press the [BACK½] key.

Step 11:

If no other items are to be changed, press the [BACK½] key.

Step 12:

Do not press any other keys for 3 minutes or press [BACK½] key again.

Step 13:

The permanent display is restored.

Plot OK

*Menu* Utility >

Error Display: No

Initial: No

Initial: Yes >

InitialAll: No

Initial Network: No

Initial Network: OK