User`s guide

If roll media is being used, the media will be fed in the reverse direction while
the [Shift] key and [Resolution] key are pressed. Roll media will not be fed
while data is being received or processed. Media is not fed while cut media is
in use.
Step 1
The reverse media feed function can be used only when roll media is loaded and data
is not being received.
Step 2
Feed roll media (in reverse direction) by pressing the [Resolution] key
while you are pressing the [Shift] key.
Step 3
Release the [Shift] key and [Resolution] key when the roll media has
been fed to the desired position.
Reverse Media Feed
Important :
Before using the reverse media feed option be sure the media is dry.
Otherwise, the outprint could
get damaged.
82 Falcon Outdoor 46/62 USER GUIDE (AP-75046)