User`s guide

• If values other than those set at the time of shipping from

Mutoh are used, be sure to refer to "Centronics Settings" on

page 136 or "Network Settings" on page 138.

Command Set-up (User Settings)

Each user will specify the online commands from the computer and the com-

mand conditions.

Commands

The type of command for verification is the MH-GL system (MH-GL/GL2, MH-

GL2, RTL-PASS).

MH-GL system commands (emulation of Hewlett-Packard printer com-

mands)

Settings at the time of shipping by Mutoh

Command Item

Initial position P1

Terminator Normal

Resolution 360 dpi

• If values other than those set at the time of shipping from

Mutoh are used, be sure to refer to "Command Settings" on

page 113.

To Receive Data from the Computer

Command Set-up (User Settings)

NOTE

Preparing for Printing

Falcon Outdoor 46/62 USER GUIDE (AP-75046)