User`s guide

Using Pre- and Post-Heaters.
Use the Pre- and Post-heater for uncoated or slow-drying media. With the Heaters you
can get a wider range of media compatibility.
When usi
ng the heaters set it on the maximum temperature. (50°C)
Important :
Depending on the use of media, it is possible that media starts to curl.
If this is the case, lower the temperature.
Preparing for Printing
Falcon Outdoor 46/62 USER GUIDE (AP-75046) 65
Important :
Depending on the use of media, it is possible that media starts to curl.
If this is the case, lower the temperature.