User`s guide

Falcon Outdoor 46/62 USER GUIDE (AP-75046)

Loading the Media

Loading Roll Media

Once your print is finished and dry you can wind up your print via a manual feed button.

If you want to sheet off the print push the cancel button for 2 seconds and confirm the

sheet-off request.

If you want to wind up or wind off your print you can do this via the forward / reverse

button.

Fix the media on the cardboard core by means

of self-adhesive tape strips in the middle and on the left and right side.

Note :

First attach the middle of the media on the cardboard core to avoid

slipping of the media.

tep 17 :

Feed the media slightly forward (using SHIFT & ADVANCE) and wind it up on the take-up

system.

Now you are ready to start printing.

Once the printer has printed as much as shown on the figure below, the sensors will be

activated and the take-up system will start winding up the media.

Feed the media forward by pressing the SHIFT &

ADVANCE keys simultaneously until the media

reaches the cardboard core on the take-up

system.

tep 15 :

tep 16 :