User`s guide

Step 8 : Installation of the scroller.
Install the scroller as follows :
a) Stand at the back side of the printer, holding the scroller with the fixed flange side in
your left hand.
b) Slide the scroller (left side) into the scroller receiver, as shown in the illustration.
c) Push the scroller (Right side – movable flange side) down into the right scroller
receiver. You will notice it dropping nicely into place.
60 Falcon Outdoor 46/62 USER GUIDE (AP-75046)
Loading the Media
Loading Roll Media
St
ep 7: Installing the scroller slip ring
Install the scroller slip ring onto the scroller. Slide the scroller slip ring on the left side of
the scroller (side with fixed flange).