User`s guide

Loading the Media

Loading Roll Media

Preparing for Printing

Step 4 :

Take your roll of media.

Step 5 :

Remove the moveable flange from the

scroller by pulling it off.

Movable Flange

Step 6 : Load the media onto the scroller.

Feed the scroller through the media core.

Gently but firmly press the roll media over the fixed flange.

Slide the moveable flange over the scroller and firmly press the flange inside the roll media

core.

1 = Fixed flange

2 = Media winding direction

Note :

· Do not drop the media roll over the scroller as this might damage

the scroller end caps. Damaged end caps may cause media

tracking problems.

· All Mutoh recommended roll media are rolled up with the printable

side facing the outside, so that you can load the roll media easily.

Falcon Outdoor 46/62 USER GUIDE (AP-75046)